Audix D2 Dynamic Instrument Microphone

The Audix D2 is well suited for use in stage - studio - and broadcast applications - and features the frequency and sensitivity response required for accurately reproducing signals from drums and percussion instruments The mic has a dynamic element capable of reproducing signals with high transient peaks - while maintaining a clear - punchy - and warm sound The D2 offers a frequency response of 68 Hz to 18 kHz which features a slight bump in the mid-bass frequencies The contoured mid-bass response accentuates the tonal frequencies associated with instruments that have a percussive nature - such as rack toms - congas - floor toms - saxophone - brass - horns - as well as guitar and bass cabinets The hypercardioid polar pattern provides a tight pickup area at the front of the capsule for isolation and feedback control - and it is equipped with a VLM (Very Low Mass) diaphragm for natural - accurate sound reproduction Ambiance and noise at the off-axis sections of the microphone are greatly reduced - resulting in high signal-to-noise ratio

Features: For Drums & Percussion, Ideal for Stage, Studio & Broadcast, For Saxophone & Brass, >144 dB Maximum SPL Rating, Enhanced Mid-Bass Frequencies, 68 Hz to 18 kHz Frequency Range, Dynamic Element, For Guitar & Bass Cabinets, Hypercardioid Condenser

Number of Included Mics: 1

Microphone Type: Large Diaphragm

Polar Pattern: Hypercardioid

Element Type: Dynamic

Sound Field: Mono

Orientation: End Address

Controls: No

Pad: No

Circuitry: Solid-State

Included Tone/Pattern Caps: No

Frequency Response: 68 Hz to 18 kHz

Maximum SPL: 144 dB

Sensitivity: 1.2 mV/Pa (at 1 kHz)

Analog Output Connector: 1x XLR 3-Pin

USB/Digital Output: No

Headphone Output: No

Wireless: No

Power Sources: No Power Required

Color: Black

Included Mounting & Placement Accessories: Mic Clip/Stand Adapter

Dimensions: L: 3.9-inch / L: 100 mm

Dimensions: L: 3.9-inch / L: 100 mm

Weight: 4.5 oz / 128 g

Weight: 4.5 oz / 128 g