Audio-Technica Consumer AT-LPW50PB Fully Manual Tw

Enjoy your favorite 33 1/3 and 45 rpm vinyl records with your stereo system and the Audio-Technica AT-LPW50PB Fully Manual Two-Speed Stereo Turntable It has a built-in switchable preamplifier - allowing you to connect directly to your stereo system or speakers of choice via RCA cables A removable dust cover - RCA cable - and 45 rpm adapter are included

Features: AT-VM95E Dual MM Cartridge, Die-Cast Aluminum Platter, Includes Removable Dustcover, Plays 33 1/3 and 45 rpm Vinyl Records, Fully Manual Operation, Built-In Switchable Phono Preamp

Motor: DC Servo

Drive Method: Belt Drive

Speeds: 33 1/3 - 45 rpm

Tonearm Type: Straight - Carbon Fiber - Static-Balanced

Effective Tonearm Length: 8.8-inch / 223.6 mm

Overhang: 0.73-inch / 18.6 mm

Tracking Error Angle: <2 degrees

Cartridge Weight: Applicable: 12 to 17 g

Stylus Pressure Adjustment: 0 to 3 g

Replacement Stylus: AT-VMN95E BK

Cartridge Type: VM

Recommended Load Impedance: 47 Kilohms

Stylus: 0.3 x 0.7 mil Bonded Elliptical

Stylus Cantilever: Aluminum Pipe

Signal to Noise Ratio: >60 dB

Tracking Force: 1.8 to 2.2 g

Cartridge Weight: 0.22 oz / 6.1 g

Headshell: Model: AT-HS4 BK Weight: 8.5 g Excluding Lead Wires Mount: 1/2-inch

Overhang: Headshell Adjustment: ±5 mm

Wow and Flutter: 33 rpm: <0.15% WRMS @ 3 kHz

Connectors: 1 x Stereo RCA Pair with Ground Screw

Gain: Phono Preamp: 35 dB Nominal - RIAA Equalized

Output Level: Phono: 4 mV Nominal at 1 kHz - 5 cm/sec Line: 200 mV Nominal at 1 kHz - 5 cm/sec

Turntable Platter: Die-Cast Aluminum

Power Requirements: 100 to 240 VAC - 50/60 Hz - 0.5 A Max

Power Consumption: Operational: ≤1.3 W @ 110 VAC - 60 Hz Motor Off: 1 W @ 110 VAC - 60 Hz Power Off: 0.1 W @ 110 VAC - 60 Hz

Dimensions: With Dustcover: 16.54 x 4.96 x 14.02-inch / 420 x 126 x 356 mm Without Dustcover: 16.54 x 4.49 x 14.02-inch / 420 x 114 x 356 mm

Weight: 12.26 lb / 5.56 kg without Dustcover