Shure MXCWAPT-A Access Point Receiver (US)

The MXCWAPT-A Access Point Receiver from Shure is a hub for the Microflex Complete Wireless Conference System designed to operate in the US It can be used to manage audio routing - frequency coordination - and system control for up to 125 wireless conference unitsThe MXCWPT-A scans the 24 and 5 GHz frequency bands and identifies the clearest channel It then conveys that information to the conference units The system takes advantage of limited-access DFS spectrum to expand the number of available channels If a conflict is identified - the Access Point instructs all conference units to change channels It features AES-128 encryption for enhanced privacyFurthermore - this Access Point includes a Dante networked audio connection that supports up to 10 input and 10 output channels Analog XLR audio input and output allow for connection of a wireless microphone for a presenter or an external sound reinforcement system for an audienceThe MXCWAPT-A includes an information display and controls for basic system configuration without a laptop It is powered by a standard PoE switch or power injector Finally - it can be mounted on the wall or ceiling with the included mounting bracket and paintable cover or placed on a table for temporary meetings

Features: Manages Audio, Routing, and Frequencies, Controls up to 125 Wireless Units, Selects Clearest Channel in 2.4 or 5 GHz, Switches Channels to Avoid Interference, Analog and Dante Inputs and Outputs, PoE Power, Includes Wall/Ceiling Mounting Plate

Maximum Input Level: 24.9 dBV (1% THD+N. Measured at Dante Output. Line Level - Analog Input Gain = 0 dB - Dante Output Gain = 0 dB) 10.3 dBV (1% THD+N. Measured at Dante Output. Aux Level - Analog Input Gain = 0 dB - Dante Output Gain = 0 dB)

Frequency Response: 22 Hz to 20 kHz (+0.5 dB/-3 dB - Measured at Dante Output. -6 dBFS Input - Line Level - Analog Input Gain = 0 dB - Dante Output Gain = 0 dB) 22 Hz to 20 kHz (+0.5 dB/-3 dB - Measured at Dante Output. -6 dBFS Input - Aux Level - Analog Input G

Total Harmonic Distortion/Noise: 0.03% - Typical (Measured at Dante Output. -6 dBFS Input - 1 kHz - Line Level - Analog Input Gain = 0 dB - Dante Output Gain = 0 dB - 22 Hz to 22 kHz BW) 0.02% - Typical (Measured at Dante Output. -6 dBFS Input - 1 kHz - Aux Level - AnalogI

Dynamic Range: 115 dB [A-Weighted - 113 dB (Unweighted) - Typical Measured at Dante Output. Line Level - Analog Input Gain = 0 dB - Dante Output Gain = 0 dB - 22 Hz to 22 kHz BW] 112 dB [A-Weighted - 110 dB (Unweighted) - Typical Measured at Dante Output. A

Equivalent Input Noise: Preamplifier -92 dBV (A-Weighted - Typical Line Level - Analog Input Gain = 0 dB - 22 Hz to 22 kHz BW) -104 dBV (A-Weighted - Typical Aux Level - Analog Input Gain = 0 dB - 22 Hz to 22 kHz BW)

Connector Type: XLR-3-Pin Female (Pin 1 = Ground - Pin 2 = Audio + - Pin 3 = Audio -)

Maximum Output Level: 4.3 dBV (1% THD+N. Audio Injected at Dante Input. Dante Input Gain = 0 dB - Analog Output Gain = 0 dB)

Frequency Response: 1 Hz to 20 kHz (+0.5 dB/-3 dB) Audio Injected at Dante Input. -6 dBFS input - Dante Input Gain = 0 dB - Analog Output Gain = 0 dB

Total Harmonic Distortion/Noise: 0.01% (Typical - Audio Injected at Dante Input. -6 dBFS input - 1 kHz - Dante Input Gain = 0 dB - Analog Output Gain = 0 dB - 22 Hz to 22 kHz BW)

Dynamic Range (Typical): 100 dB [A-Weighted - 97 dB (Unweighted) - Typical Audio Injected at Dante Input. Dante Input Gain = 0 dB - Analog Output Gain = 0 dB - 22 Hz to 22 kHz BW]

Load Impedance: >600 Ohms - Typical

Connector Type: 3-Pin XLR Male [Standard XLR Pinout (Pin 1 = Ground - Pin 2 = Audio + - Pin 3 = Audio -]

Ground Lift: XLR GND Lift Switch Position - -inch Left (Pin 1-GND Connected) Right (Pin 1-GND Disconnected)-inch

Equivalent Noise Level: -104 dBV [A-Weighted - Typical Aux Level - Analog Input Gain = 0 dB - 22 Hz to 22 kHz BW] Input Impedance 10 Kilohms Line Level

Input Impedance: 10 Kilohms - Line Level 12 Kilohms - Aux Level

Configuration: Balanced

IEEE WLAN Standard: IEEE 802.11 a - g

Frequency Bands: 2.4 GHz ISM - 5 GHz UNII

Sensitivity: -80 dBm at 10% PER

RF Output Power: 1 mW (Low) - 5 mW (Medium) - 13 mW (High) - 25 mW (Maximum)

Antenna Type: Proprietary Internal Bi-Level Dual-Band (PIFA) - Patent Pending

Supply Type: Power over Ethernet (PoE) 802.2 af - Class 0 PD

Supply Voltage: 37 to 57 V

Power Consumption: 12.95 W Maximum - 6.5 W Typical

Interface: Gigabit Ethernet - Dante Digital Audio

Link: Speed: 10/100/1000 Mb/s

Network Addressing Capability: DHCP or Manual IP Address

Cable Length: 328' / 100 m Maximum

Cable Type: Cat 5e or Higher

Type: Monochrome FFSTN LCD

Display Size: 1.84 x 0.074-inch / 46.7 x 18.8 mm

Display Resolution: 152 x 78 (78 ppi)

Housing: Molded Plastic - Die-Cast Aluminum

Mounting: Ceiling Bracket or Wall

Operating Temperature Range: 19.4 to 120.2 degrees F / 7 to 49 degrees C

Storage Temperature: -20.2 to 140 degrees F / -29 to 60 degrees C

Dimensions: 1.88 x 9.55 x 9.52-inch / 47.8 x 242.5 x 241.8 mm

Weight: 2.54 lb / 1.15 kg