Sony MAS-A100 IP-Based Ceiling Beamforming Microph

The Sony MAS-A100 is an IP-based beamforming microphone designed to provide clear audio for both speech reinforcement and recording in corporate meetings - lectures - and presentations The microphone is simply affixed to the ceiling and ready to use - saving you the inconvenience of setting up a lavalier mic or holding a handheld micThe beamforming technology provides a pickup pattern that changes with the location of the sound source - allowing the presenter to move around while maintaining consistent sound quality - great for hands-free presentationsWith Dante networking capability - the MAS-A100 can be integrated into existing A/V setups and used with a wide range of products supporting the Dante digital audio-over-IP networking standard including interfaces - switches - mixing consoles - and more Power over Ethernet (PoE) enables installation and power management with a single network cableThe MAS-A100 has two output channels One for speech reinforcement (with a PA system required) and one for simultaneous recording The dedicated recording channel provides a wider capture range and optimal intelligibility - allowing for crisp recordings that include not only the speaker's voice but also the students or participants

Features: For Hands-Free Lectures & Presentations, Dual Output for Live Sound & Recording, Automatic Gain Control & Noise Reduction, Requires Dante and PoE

Frequency Response: 100 Hz to 10 kHz

Sensitivity: 0 dBFS/Pa at 1 kHz

Maximum SPL: 94 dB SPL

Signal to Noise Ratio: 75 dB (A-weighted - 1 kHz - 1 Pa)

Self Noise: 19 dB SPL (A-weighted)

Dynamic Range: <75 dB

Latency: 24 ms (Not Including Dante Latency)

Dante: Channel Count: 2 Channels (Main - Rec) with Dante Sampling Rate: 48 kHz Bit Depth: 24-Bit Audio Interface: Dante - AES67

Networking: Cable Requirements: Cat5e UTP or Higher Connector Type: RJ45

Audio Technologies: Beamforming Feedback Reducer Automatic Gain Control Noise Reduction Noise Gate Automatic Calibration with Test Signal Equalizer API For External Control System

Performance: Maximum Noise Suppression: 18 dB Maximum Feedback Suppression: 32 dB

Configuration: Mic Gain (Output Volume): -60 to +12 dB Capture Range: Narrow / Standard / Wide Feedback Reduction: Low / Middle / High Noise Reduction: Low / Middle / High Noise Gate: Off / Low / Middle / High Equalizer: Fixed 5-band - ±12 dB (1 dB Step)

Power Requirements: Power over Ethernet (PoE) - Class 0

Power Consumption: 13 W (Maximum) - 9 W at 77 degreesF / 25 degreesC (Typical)

Control: Control Browser for MAS-A100 Software: Google Chrome

Operating Temperature Range: 32 to 104 degreesF / 0 to 40 degreesC

Dimensions: 9.4 x 2-inch / 240 x 50 mm

Weight: 2.2 lb / 1 kg (Main Unit Only) 2.9 lb / 1.3 kg (with Ceiling Plate)