Shure P300 IntelliMix Audio Conferencing Processor

The Shure P300 IntelliMix Audio Conferencing Processor is designed to work with the Microflex Wireless (MXW) system to deliver eight channels of acoustic echo cancellation - DSP-processing - and level control for conference rooms and meeting spaces The processor supports Microflex wireless microphones while also offering versatile input and output connectivity options that allows users to incorporate loudspeakers - computers - mobile devices - and other audio componentsThe P300 provides Dante (10 in/8 out) - and to connect analog devices - the unit provides two 3-pin block connector inputs and two 3-pin block connector outputs along with a 35mm input jack for mobile devices The USB Type-B port lets you connect computers and other USB devices - while the RJ45 port supplies the unit with power and connects it to other access points in the conference system network

Features: Use with Microflex Advance/Wireless Mics, Integrates Audio Sources for Conferences, Use Phones, Video, Speakers & Computers, Versatile Connectivity, Powerful DSP, 8-Channels with Echo Cancellation, Single Network Cable, PoE+, Dante, Analog Block, 3.5mm & USB

Frequency Response: 20 Hz to 20 kHz (+1 - -1.5 dB)

Dante Digital Audio: Sampling Rate: 48 kHz Bit Rate: 24 Bit

USB Audio: Sampling Rate: 48 kHz Bit Rate: 24 / 16 Bit

Latency: Firmware 4.1 and Newer: Dante 1-8 In to Dante Out (AEC enabled): 15.4 ms Dante 1-8 In to Dante Out (AEC disabled): 8.7 ms Dante 9-10 In to Dante Out: 3.4 ms Analog In to Analog Out: 3.8 ms Firmware 3.1 and Older: Dante 1-8 In to Dante Out (AEC Enabl

Acoustic Echo Cancelling: Tail Length: Up to 300 ms

Analog Connections: Block Connectors: Dynamic Range (20 Hz to 20 kHz - A-Weighted - Typical): Analog to Dante: 113 dB - Dante to Analog: 117 dB Equivalent Input Noise (20 Hz to 20 kHz - A-Weighted - Input Terminated with 150 Ohms): Line -86 dBV - Aux -98 dBV To

Mobile: Connector: 1/8-inch / 3.5 mm Pin Assignments: Tip: Audio Input (Left) - Ring 1: Audio Input (Right) - Ring 2: Ground - Sleeve: Audio Output (To Phone) Dynamic Range (20 Hz to 20 kHz - A-Weighted - Typical): Analog to Dante: 99 dB - Dante to

Analog Input: 2 x 3-Pin Block Connector (Active Balanced) 1 x 1/8-inch / 3.5mm TRRS Input

Control Software: Shure Designer

Analog Output: 2 x 3-Pin Block Connector (Impedance Balanced)

USB: USB 2.0 - Type B Single Port Carries 2 Input and 2 Output Channels (Summed Mono)

Network Connection: 1 x RJ45 10 x Dante Inputs 8 x Dante Outputs

Networking: Cable Requirements: Cat 5e or Higher (Shielded Cable Recommended)

Polarity: Non-Inverting - Any Input to Any Output

Power Requirements: 802.3 at Type 2 (PoE Plus) - Class 4

Power Consumption: 17.5 W - Maximum

Thermal Dissipation: Maximum: 17.5 W (60 BTU/Hr) Typical: 14.6 W (50 BTU/Hr)

Operating Temperature Range: 20 to 122 degrees F / -6.7 to 50 degrees C

Storage Temperature Range: -20 to 165 degrees F / -29 to 74 degrees C

Dimensions: 1.6 x 8.3 x 8.9-inch / 4 x 21 x 22.6 cm

Weight: 3.8 lb / 1.71 kg