Product Description
Features: Four Auto Tracking Beams, Works with RM-CR Signal Processor, Incorporates Innovative Technologies, Network Audio Support for Dante, Single PoE Network Cable Connection, Supports Multiple Mounting Methods, Dynamic Voice Tracking for Human Voice, Microphone for ADECIA System, Customizable Communications Solutions
Type: Ceiling Array Microphone
Network: Ether1: Dante - Remote Control - Web UI - PoE Cable Requirements: Cat 5e or Higher (STP)
Frequency Response: 160 Hz to 16 kHz (-10 dB)
Sample Rate: 48 kHz
Bit Depth: 24-Bit
Latency: 58 ms (Includes Signal Processing)
Audio Input & Output: Dante 1 x Input 2 x Output In: AEC Reference Signal Out 1: Output of Beam Mix Out 2: Output of Beam Mix (Simple Processed)
Input Level: 117.8 dB SPL
Self Noise: -0.8 dBA
Signal-to-Noise Ratio (SNR): 94.8 dBA
Sensitivity: -23.8 dBFS/Pa
Dynamic Range: 118.6 dBA
Signal Processing: Multi Beam Tracking - Adaptive Echo Canceller - Noise Reduction - Dereverberation - Auto Mixer - Auto Gain Control - Parametric EQ - Output Gain
Maximum Device Control: Maximum Device Number with RM-CR: 2 (Connection with Other than RM-CR Is Not Limited to This Device)
Indicators: Front Indicator (Mute/Unmute & Status) - Network Port Indicator
Mount: Ceiling Mount (Can't Replace a Grid Ceiling Panel) - Wire Mount - VESA Mount
Water/Dust Protection: IP5X for Dust Protection (with Terminal Cover)
Plenum Rating: UL2043 (with Terminal Cover)
Color: White
Temperature & Humidity: In Operation Temperature: 32 to 104 degreesF / 0 to 40 degreesC Humidity: 30 to 90% (No Condensation) Storage Temperature: -4 to 140 degreesF / -20 to 60 degreesC Humidity: 20% to 90% (No Condensation)
Power: Power Requirements: PoE (IEEE 802.3af) - 48 VDC Maximum Power Consumption: 7.2 W
Dimensions: 22 x 22 x 3.5-inch / 56 x 56 x 9 cm
Weight: 12.3 lb / 5.6 kg