LabGruppen E122 1200W E-Series Installation Amplif

System installers in search of a compact - flexible amplifier with Hi-Z and Lo-Z capabilities should check out the LabGruppen E 122 - a 1 RU - two-channel 1200W amplifier for mixed A/V installation applications The E 122 utilizes IntelliDrive Energy Efficient Amplifier (IDEEA) technology to produce high power levels with very low distortion while drawing minimal mains current E-Series amplifiers also utilizes LabGruppen's proprietary Rail Sensing Limiter (RSL) technology - which greatly reduces signal clipping to ensure high-quality audio output all the time The amplifier is user-configurable for Hi-Z (70V) or Lo-Z The RSL circuit senses rail voltage and optimizes each channel output for instantaneous load conditions This allows for asymmetrical channel loading for optimized performance and efficiency Total available output power can be allocated among the channels as required by the application This makes it possible - for example - to drive a small sub on one channel and several 70V ceiling loudspeakers on the second channel

Features: Two-Channel Amplifier: 2 x 600W, IntelliDrive: 70V or 2, 4, 8, 16 Ohms, Energy-Efficient Class-D Amplifier, Asymmetric Channel Loading, Comprehensive Circuit Protection, Rail Sense Limiter (RSL), Includes Screw Terminal I/O Blocks, Includes Power Cord, Limited 5-Year Warranty

Number of Channels: 2

Power Rating: 2 Ohms / 4 Ohms / 8 Ohms:600 W 16 Ohms:310 W 70 V / 100 V:600 W

Amplifier Class: Class-D

Load Impedance / Voltage: 2 / 4 / 8 / 16 Ohms 70 / 100 V

Protections: Reactive/Mismatched Load - Short Circuit - Thermal - Undervoltage

Frequency Response: 2 Hz to 40 kHz

Input Sensitivity: 4 dBu (at 4 Ohms) 4 dBu (at 70 V) 1 dBu (at 2 Ohms)

Input Impedance: 20 Kilohms

Max Gain: 35.2 dB (at 70 V)32 dB (Low-Z)

SNR: > 112 dBA

THD: < 0.1% (20 Hz to 20 kHz - at 1 W) < 0.05% (1 kHz - Below Rated Power)

Crosstalk: > 70 dB

Common Mode Rejection Ratio (CMRR): 50 dB

Crossover: Yes

Filters: High-Pass:50 Hz

Limiting: Yes

Analog Audio I/O: 2x Block 3-Pin Balanced Line Input4x Block 2-Pin Speaker2x Block 2-Pin GPIO Input/Output

AC Input Power: 100 to 240 VAC - 50 / 60 Hz

AC Power Connector: 1x IEC 15 A / NEMA 5-15

Power Consumption: 1 W (Standby)

Rackmount Size: 1 RU

Cooling: Fan (Variable Speed)

Certifications: ANSIS1.4 Type 2 - CCC - CE - CSA - ENERGY STAR - ETL - PSE - UL

Dimensions: 19.0 x 1.8 x 10.9-inch / 482.6 x 45.7 x 276.9 mm

Weight: 9.3 lb / 4.2 kg