Thermaltake Toughpower GF3 1200W 80 PLUS Gold Modu

Power up your computer system without cluttering it with cables by using the Thermaltake Toughpower GF3 1200W 80 PLUS Gold Modular ATX Power Supply Delivering high power efficiency with the Intel ATX 30 specification - this power supply provides up to 750W with a single +12V rail Supporting PCIe 50 graphics cards - the Toughpower GF3 includes a 16-pin VGA power connector that helps to ensure performance and stability The flat - fully modular - low-profile cable design allows you to only use the cables that you need for a clean - organized - and uncluttered buildIn addition to the motherboard and CPU power connectors - there are four PCIe connectors - 12 SATA connectors - and four 4-pin connectors for peripherals A floppy drive adapter - which attaches to a 4-pin connector - is also included The Thermaltake Toughpower GF3 has an estimated mean time before failure (MTBF) rating of 100 -000 hours

Features: 1200W Single +12V Rail, 135mm Fluid Dynamic Bearing Fan, 4 x PCIe Connectors, 12 x SATA Connectors, 4 x 4-Pin Peripheral Connectors, Modular, Flat, Low-Profile Cables, ATX 3.0 Compatibility, Supports PCIe 5.0 Graphics Cards

Total Connectors: 1x 24-Pin ATX Motherboard1x 8-Pin EPS CPU1x 4+4-Pin EPS CPU4x 6+2-Pin PCIe1x 16-Pin PCIe (12VHPWR)12x 15-Pin SATA4x 4-Pin Peripheral / Molex1x 4-Pin Floppy

Cable Design: Flat - Modular

PCIe Connector Distances: 19.7-inch / 500 mm25.6-inch / 650 mm

SATA Connector Distances: 19.7-inch / 500 mm25.6-inch / 650 mm31.5-inch / 800 mm37.4-inch / 950 mm

Peripheral Connector Distances: 19.7-inch / 500 mm25.6-inch / 650 mm31.5-inch / 800 mm37.4-inch / 950 mm

Floppy Connector Distances: 3.9-inch / 100 mm (Adapter)

ATX Connector Distance: 23.6-inch / 600 mm

EPS Connector Distances: 27.6-inch / 700 mm

Total Wattage: 1200 W

Number of +12 V Rails: 1

Combined Power for +12 V: 1200 W

Max Load for +12 V: 100 A

Combined Power for +3.3/+5 V: 120 W

Max Load for +3.3 V: 22 A

Max Load for +5 V: 22 A

Max Power for +5 Vsb: 15 W

Max Load for +5 Vsb: 3 A

Max Power for -12 V: 3.6 W

Max Load for -12 V: 0.3 A

Input Power: 100 to 240 VAC - 50 / 60 Hz at 7 to 15 A

Efficiency Rating: 80 PLUS Gold

Active Power Factor Correction: Yes

Fan Size: 135 mm

Bearing Type: Fluid Dynamic Bearings (FDB)

Noise Level: 28.4 dBA

Form Factor: ATX

Compliance: ATX 12 V v3.0

Protection: Over-Current Protection - Over-Power Protection - Over-Temperature Protection - Over-Voltage Protection - Short-Circuit Protection - Under-Voltage Protection

Certifications: BSMI - CB - CCC - CE - EAC - FCC - IC - TUV - UKCA

Operating Conditions: 32 to 104 degreesF / 0 to 40 degreesC

Mean Time Between Failures (MTBF): 100 - 000 Hours

Dimensions: 6.3 x 5.9 x 3.4-inch / 160 x 150 x 86 mm

Weight: 4.14 lb / 1.88 kg