Best Collateral Rewards
Thermaltake Toughpower GF3 1650W 80 PLUS Gold Modu Product Image
Thermaltake Toughpower GF3 1650W 80 PLUS Gold Modu Product Image

Thermaltake Toughpower GF3 1650W 80 PLUS Gold Modu

by Thermaltake

19,283 points


Product Description

Power up your computer system without cluttering it with cables by using the Thermaltake Toughpower GF3 1650W 80 PLUS Gold Modular ATX Power Supply Delivering high power efficiency with the Intel ATX 30 specification - this power supply provides up to 750W with a single +12V rail Supporting PCIe 50 graphics cards - the Toughpower GF3 includes a 16-pin VGA power connector that helps to ensure performance and stability The flat - fully modular - low-profile cable design allows you to only use the cables that you need for a clean - organized - and uncluttered buildIn addition to the motherboard and CPU power connectors - there are nine PCIe connectors - 16 SATA connectors - and four 4-pin connectors for peripherals A floppy drive adapter - which attaches to a 4-pin connector - is also included The Thermaltake Toughpower GF3 has an estimated mean time before failure (MTBF) rating of 100 -000 hours

Features: 8 x 4-Pin Peripheral Connectors, Modular, Flat, Low-Profile Cables, ATX 3.0 Compatibility, Supports PCIe 5.0 Graphics Cards, 16 x SATA Connectors, 9 x PCIe Connectors, 135mm Fluid Dynamic Bearing Fan, 1650W Single +12V Rail

Total Connectors: 1x 24-Pin ATX Motherboard1x 8-Pin EPS CPU1x 4+4-Pin EPS CPU9x 6+2-Pin PCIe2x 16-Pin PCIe (12VHPWR)16x 15-Pin SATA8x 4-Pin Peripheral / Molex1x 4-Pin Floppy

Cable Design: Flat - Modular

PCIe Connector Distances: 23.6-inch / 600 mm29.5-inch / 750 mm

SATA Connector Distances: 23.6-inch / 600 mm29.5-inch / 750 mm35.4-inch / 900 mm41.3-inch / 1050 mm

Peripheral Connector Distances: 23.6-inch / 600 mm29.5-inch / 750 mm35.4-inch / 900 mm41.3-inch / 1050 mm

Floppy Connector Distances: 5.9-inch / 150 mm (Adapter)

ATX Connector Distance: 23.6-inch / 600 mm

EPS Connector Distances: 29.5-inch / 750 mm

Total Wattage: 1650 W

Number of +12 V Rails: 1

Combined Power for +12 V: 1650 W

Max Load for +12 V: 137.5 A

Combined Power for +3.3/+5 V: 130 W

Max Load for +3.3 V: 25 A

Max Load for +5 V: 25 A

Max Power for +5 Vsb: 15 W

Max Load for +5 Vsb: 3 A

Max Power for -12 V: 3.6 W

Max Load for -12 V: 0.3 A

AC Input Power: 100 to 240 VAC - 50 / 60 Hz at 16 to 20 A

Voltage Regulation: +3.3 V: ± 3% - +5 V: ± 3% - +12 V: ± 3% - -12 V: ± 3% - +5 Vsb: ± 3%

Ripple and Noise: +3.3 V: 30 mV - +5 V: 30 mV - +12 V: 30 mV - -12 V: 30 mV - +5 Vsb: 30 mV

Efficiency Rating: 80 PLUS Gold

Active Power Factor Correction: Yes

Hold up Time: 17 ms at 100% Load

Power-Good Signal: 100 to 250 ms

Fan Size: 140 mm

Bearing Type: Fluid Dynamic Bearings (FDB)

Noise Level: 36.6 dBA

Operating Temperature: 32 to 122 degreesF / 0 to 50 degreesC

Operating Humidity: 20 to 90% ()

Storage Temperature: -40 to 158 degreesF / -40 to 70 degreesC

Storage Humidity: 20 to 95% (Non-Condensing)

Form Factor: ATX

Compliance: ATX 12 V v3.0

Protection: Over-Current Protection - Over-Power Protection - Over-Temperature Protection - Over-Voltage Protection - Short-Circuit Protection - Under-Voltage Protection

Certifications: CE - UKCA - TUV - FCC - IC - BSMI - EAC - CB - CCC

Mean Time Between Failures (MTBF): 100 - 000 Hours

Dimensions: 5.9 x 3.4 x 7.1-inch / 150 x 86 x 180 mm

Weight: 4.72 lb / 2.14 kg