Audiolab 6000A Play Stereo 100W Network Amplifier

Stream from your favorite streaming services and source devices and enjoy enhanced stereo sound with your favorite pair of speakers and the black Audiolab 6000A Play Stereo 100W Network Amplifier It outputs up to 50W per channel at 8 ohms and features Bluetooth and Wi-Fi connectivity in addition to its two digital coaxial - two optical - and four stereo RCA inputs One RCA input is a dedicated phono input and is accompanied by a ground screw terminal An 1/8 headphone jack on the front enables private listening - and DTS Play-Fi compatibility lets you stream audio to compatible speakers and systems throughout the house

Features: ESS SABRE ES9018K2M DAC, Stereo RCA Output, 4x Stereo RCA Inputs, 1x Phono, 2x Digital Coaxial, 2x Optical Inputs, DTS Play-Fi Wireless Audio, 2-Channel Amplifier Configuration, 50W per Channel Power Output @ 8 ohms, Includes Remote Control, Bluetooth & Wi-Fi Connectivity, Works with Alexa

Configuration: Stereo

Power Output per Channel: Up to 50 W Max @ 8 Ohms - Up to 75 W Max @ 4 Ohms - <1% THD

Amplifier Class: Class-AB

Total Harmonic Distortion: Preamp Section: Power Amp Section: Headphone Amp: <0.01% (1 kHz - 10 mW into 20 Ohms)

Frequency Response: Preamp Section: 20 Hz to 20 kHz (±0.1 dB) Power Amp Section: 20 Hz to 20 kHz (±0.3 dB)

Damping Factor: Not Specified by Manufacturer

Model: ESS SABRE ES9018K2M

THD: <0.0006% (1 kHz @ 0 dBFS)

Output Level: 2.05 V @ 0 dBFS - 1 kHz

Max Sampling Rate: 192 kHz

Signal to Noise Ratio: >112 dB (A-Weighted)

Bluetooth: Yes (aptX - aptX LL)

Wi-Fi: Wi-Fi 5 (802.11a/b/g/n/ac)

Inputs: 5 x Stereo RCA Pairs (1 Phono with Ground Screw - 1 Power Amp) 2 x Optical TOSLINK 2 x Digital Coaxial

Output: 1 x Stereo RCA Pre-Out 1 x 3.5 mm Headphone

Speaker Connectors: 2 x Binding Post Pairs

Other Connectors: 1 x RJ45 Ethernet LAN 1 x 1/8-inch / 3.5 mm 12 V Trigger In 1 x 1/8-inch / 3.5 mm 12 V Trigger Out 1 x USB Type-A (Service) 2 x Wi-Fi Antenna Terminals 1 x Bluetooth Antenna Terminal

Input Impedance: Line: 10 Kilohms Phono MM: 47 Kilohms / 100 pF

Input Sensitivity: Line - Volume = 0 dB: 720 mV Phono MM - Volume = 0 dB: 3.1 mv

Headphone Impedance Range: 20 to 600 Ohms

Gain: Preamp Line: 8 dB Phono MM: 55 dB Power Amp 29 dB

Max Output Voltage: 2.3 V (Volume = 0 dB)

Output Impedance: Preamp: 120 Ohms Headphone: 2.35 Ohms

Signal to Noise Ratio: Line - A-Weighted: >110 dB Phono MM - A-Weighted: >76 dB

Max Output Current: 9 A

Power Requirements: 100 to 120 VAC - 50/60 Hz

Standby Power Consumption: <0.5 W

Dimensions: 17.5 x 2.6 x 11.8-inch / 445 x 65.5 x 300 mm

Weight: 17.4 lb / 7.9 kg